|
Portable Submersible Pump
Jasco portable submersible pumps are robust and sturdy in construction, computer aided design ensures most compact and efficient pump. It is designed for continuous operation. It is portable, light in weight. Suction being at bottom, pump can draw water to the lowest level. Special anti corrosive process is carried out to wetted parts for longer life. Jasco portable submersible pump is driven by F class oil filled motor with IP 68 protection. This pump can be available i single phase or three phase version. Semi open, radial impeller is mounted on extended motor shaft. Motor winding is protected from pumping liquid by two mechanical seals of adequate size and material, fitted in oil chamber. Thermister control, float arrangement can be provided optionally. Cutter arrangement and agitator can be provided optionally. Motor body, motor shaft and impeller shall be S.S., all stationary parts like volute, oil chamber cover etc. shall be graded C.I. casting, winding shall be 'F' class insulated, cable shall be multicore cable with double sheathing. Anti-friction heavy duty ball bearings are provided at both upper and lower end of motor shaft. Stator and rotor are vacuum impregnated with heavy duty thermal varnish. Impeller and rotor are dynamically balanced for vibration free and noiseless operation. Application
- Handling industrial waste water
- Cleaning of man hole
- Construction site and basement.
- Kitchen waste in Hotels
- Drainage of reservoirs, ditches and trenches.
|
Qty
|
Name of Parts
|
Material
|
|
1
|
Handle
|
S.S. 410
|
|
4
|
Stud Lock Nut
|
S.S. 410
|
|
1
|
Top Cover
|
C.I. I.S.210 Fg200
|
|
2
|
Stud
|
S.S. 410
|
|
1
|
Upper Ball Bearing
|
-
|
|
1
|
Motor Body
|
S.S. 304
|
|
1 SET
|
Stator Stamping
|
SI Steel
|
|
1 SET
|
Rotor Die Cast
|
SI Steel + Allu
|
|
1
|
Oil Chamber
|
C.I. I.S. 210 Fg200
|
|
1
|
Volute
|
C.I. I.S. 210 Fg200
|
|
1
|
Impeller
|
S.S. 410
|
|
1
|
Impeller Lock Nut
|
S.S. 410
|
|
1
|
Cable
|
Copper + P.V.C.
|
|
1
|
Cable Screw
|
P.V.C.
|
|
3
|
'O' Ring
|
Nitrile Rubber
|
|
-
|
Winding Coil
|
C.I. I.S. 210 Fg200
|
|
1
|
Lower Ball Bearing
|
-
|
|
1 Set
|
Mechanical Seal
|
-
|
|
1
|
Spiral Plate
|
C.I. I.S, 210 Fg200
|
|
1
|
Strainer
|
S.S.
|
|
1
|
Bottom Plate
|
M.S.
|
Technical Specification
|
Head
|
Up to 35m
|
|
Capacity
|
Up to 150 m3/Hr
|
|
Hp
|
Up to 2 Hp (SP)
Up to 7.5 Hp (TP)
|
|
Solid Size
|
Up to 50 mm
|
|
Speed
|
1450/2900 rpm
|
|
